Where should you mount a Starlink dish at a UK home?

Check your own sky view first

Try the app’s obstruction check at accessible positions before ordering. Trees, fences and the house itself may block part of the sky. The check needs to match the dish’s proposed location and height: standing on the lawn cannot establish whether a roof position will work. If the only likely position is high up, ask an installer to assess it. You should not climb onto a roof to use the app.

The included kickstand: an accessible surface

Standard 4 and 4 X come with a detachable kickstand for quick setup or permanent placement. You do not automatically need a roof mount. Choose a stable position where the dish can stay secure and the cable will not be caught underfoot or crushed by a door. A low position can be easier to reach later, but it still has to pass the sky check.

A wall mount near the eaves

Starlink’s Standard Wall Mount fits near a gable or fascia and is listed for an overhang of up to 4 inches, about 10 cm. Deeper eaves may need a different arrangement. Check that the dish has clearance to align and that the mounting surface and fixings are suitable. A bracket reaching around the roof edge is only useful if the dish then has the sky view it needs.

A roof mount: check the roof material

The Standard Pivot Mount adjusts for a sloping roof. Starlink describes it for shingled roofs, so do not assume its supplied fixings and sealing method suit UK tiles or slate. Ask a suitable installer to choose a method for the actual roof, with proper weatherproofing and access. Putting the dish higher can clear nearby obstructions, but height alone does not establish that the location will work.

A pipe adapter on a suitable pole

The Standard Pipe Adapter connects the dish to an existing metal pole within its specified diameter range. The pole is separate and must already be securely supported; the adapter does not solve that part of the installation. Starlink excludes pole mounts from its standard professional-installation service, so agree a separate scope with an independent fitter if that is the route you need.

Check the kit name before buying accessories

The Standard wall, pivot and pipe mounts described here are listed for Standard 4 and 4 X. Mini and older actuated dishes have different fittings. Match the accessory to the exact kit on your order. Reusing an old bracket may need a specific adapter as well as a check that the bracket and its fixings remain sound. Measure the whole cable route before committing to the position.

Check again once the dish is connected

The working dish builds an obstruction map from its satellite connections, which Starlink says can take up to 12 hours. Check it after setup and test normal use before deciding the position is satisfactory. Think beyond that day too: bare winter branches can fill with leaves, trees keep growing and the equipment may need maintenance. Leave yourself a practical way to get it checked later.